Products

Type C Universal Plug Adapter With The Patented Universal Receptacle Design That Accepts Plugs From Most Countries Including The US And Canada. The ‘Type C’ Plug Adapter Is Ungrounded And Fits In To Many Sockets Around The World. Type C Is The Most Widely Used Socket Around The World. It Is Used In Continental Europe, Middle East, Africa, South America And Asia. The 2-In-1 Adapter Plug Features Additional Convenient Receptacle For Ungrounded 2 Prong Plugs On Top. Key Features Output: “Type C” Suitable For European Union, Russia, Etc. New Conductivity Design – Internal Metal Interfaces Provides Better Conductivity. Insulated Voltage – Proof: 3KV For Recessed And Non-Recessed Outlets CE Approved, RoHS Compliant New Insulated Design – Half-Way Covered By Plastic, Provides Better Safety Protection 10A/250V 4.0 Mm, 4.0 Mm Prongs Note: Plug Adapters Do Not Convert Voltage, They Just Change The Plug Type. Use A Proper Voltage Converter Along With A Plug Adapter If Your Device Is Incompatible With The Country’s Voltage. Other Countries Includes: Algeria, Argentina, Armenia, Aruba, Austria, Azerbaijan, The Azores, Bahrain, Bangladesh, The Balearic Islands, Belarus, Belgium, Bolivia, Bosnia-Herzegovina, Brazil, Bulgaria, The Cape Verde Islands, Chad, Chile, Croatia, Curacao, The Czech Republic, Denmark, East Timor, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, The Republic Of Guinea, Hungary, Iceland, Indonesia, Italy, Iran, Iraq, Jordan, Kazakhstan, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lithuania, Luxembourg, Macedonia, Madeira, Myanmar (Burma), Moldova, Monaco, Montenegro, Mozambique, The Netherlands, New Caledonia, Niger, Norway, Oman, Palestine, Peru, Poland, Portugal, Qatar, Romania, Russia, Saba, Saudi Arabia, Sint Eustatius (St. Eustace), Sint Maarten (St. Marten), Serbia, Slovakia, Slovenia, Spain, Syria, Suriname, Sweden, Switzerland, Tajikistan, Turkey, Turkmenistan, Ukraine, The United Arab Emirates, Uruguay, Uzbekistan, Yemen

Type I Universal Grounded Plug Adapter With The Patented Universal Receptacle Design That Accepts Plugs From Most Countries Including The US And Canada. The 'Type I' Plug Adapter Is Grounded And Fits In To Outlets In Countries Such As China, Australia, New Zealand And More. Visit Our Worldwide Plug Adapter Guide For More Info On Outlets In Specific Countries. The 2-In-1 Adapter Plug Features Additional Convenient Receptacle For Ungrounded 2 Prong Plugs On Top. Other Countries Include: Argentina, Australia, China (Mainland, Excluding Taiwan), Fiji, New Zealand, Papua New Guinea, Tokelau (The Union Islands), Uruguay Engineered for global travel Designed with double ports (receptacles) allow you to plug-in two electrical devices (connectors) at once (Does not Convert Voltage) US Patented Universal Input: Accepts plugs from all countries (except the Type M - big S. Africa 8.7mm Plug) Output: "Type I" Suitable for Australia & New Zealand New conductivity design - internal metal interfaces provides better conductivity. Grounded 3 Round Prong plug. Max Capacity Up to 3000 Watt (max 250 Volt, 15 A)  

Type I is mainly used in Australia, New Zealand, Papua New Guinea, China and Argentina. This 10 amp plug has two flat 1.6 mm thick blades, set at 30° to the vertical, forming an upside-down V. Their centres are spaced 13.7 mm apart and both prongs measure 17.3 mm in length and 6.3 mm in width. The flat earth blade also measures 6.3 by 1.6 mm, but it is 20 mm long. The distance between the centre of the grounding pin and the middle of the plug is 10.3 mm. There is an ungrounded version of this plug as well, with only two flat V-shaped prongs. Both plug versions have insulated live and neutral pins, so even if the plug is not fully inserted into a socket, touching the exposed part of the prongs can’t give you a shock. A plug/socket configuration rated at 15 amps is also available, but the ground pin is wider: 8 mm instead of 6.3 mm. A standard 10 amp plug will fit into a 15 amp outlet, but a 15 amp plug only fits this special 15 amp socket. There is also a 20 amp plug whose prongs are wider still. A lower-amperage plug will always fit into a higher-amperage outlet but not vice versa. Australia’s plug/socket system is codified as standard AS 3112. Although there are slight differences (the pins of Chinese plugs are 1 mm longer and the sockets are installed with the earth contact facing upwards), the Australian plug mates with the socket used in the People’s Republic of China (mainland China). The reason as to why the dimensions of the Australian type I are very similar to those of type A is because the Australasian standard is actually an obsolete type of American plug. It was patented in 1916 by Harvey Hubbell II, the same electrical engineer who had invented the type A plug. Hubbell’s three-blade design never proved popular in the U.S. because of its incompatibility with the existing type A plug, but it was favoured in Australia over the British type D system, because it was easier for local manufacturers to make plugs with flat pins rather than round ones. In the 1930s, the predominant Australian electrical accessory manufacturers, along with the State Electricity Commission of Victoria, decided to standardize on Hubbell’s design.